底泥原位洗脱过程中氮磷含量与形态变化特征

随着城市化进程的不断推进,城市河流底泥中内源氮磷污染问题日益突出.为研究原位洗脱技术对污染底泥中氮、磷物质和成分的作用效果,以北京市凉水河作为研究对象,分别比较了现场试验洗脱与对照组0~30 cm分层底泥以及实验室模拟洗脱处理前后0~10 cm底泥中pH、E_h（氧化还原电位）、容重、含水率、OM（有机质）、TN、TP和氮、磷形态分布的变化特征.结果表明:①现场洗脱对0~5 cm厚度底泥的处理和模拟洗脱处理均对底泥中pH、E_h、含水率的改变以及其中TN、TP的去除效果表现显著,其中,现场试验洗脱组0~5 cm范围底泥中w（TN）、w（TP）分别较对照组降低了66.4%±17.4%、40.8%±24.4%,模拟洗脱处理对底泥中OM、TN、TP的去除率分别达70.1%±4.8%、66.8%±2.0%、43.1%±3.1%.②原位洗脱技术对底泥中TN的去除主要通过对PON（颗粒态有机氮）的去除来实现,现场和模拟试验过程中PON对TN去除的贡献率分别达55.0%和73.6%.③原位洗脱对底泥中TP的去除主要通过对Al-P（铝结合态磷）、OP（有机磷）的去除来实现,现场和模拟试验中Al-P、OP对TP去除的贡献率分别达37.0%、66.2%和31.3%、43.7%.研究显示,原位洗脱技术可有效去除城市河流底泥处理层中的氮磷物质,并以有机氮、磷物质的去除为主.      

On-going nitrification in chloraminated drinking water distribution system (DWDS) is conditioned by hydraulics and disinfection strategies

Within the drinking water distribution system (DWDS) using chloramine as disinfectant, nitrification caused by nitrifying bacteria is increasingly becoming a concern as it poses a great challenge for maintaining water quality. To investigate efficient control strategies, operational conditions including hydraulic regimes and disinfectant scenarios were controlled within a flow cell experimental facility. Two test phases were conducted to investigate the effects on the extent of nitrification of three flow rates (Q = 2, 6, and 10 L/min) and four disinfection scenarios (total Cl₂=1 mg/L, Cl₂/NH₃-N=3:1; total Cl₂=1 mg/L, Cl₂/NH₃-N=5:1; total Cl₂=5 mg/L, Cl₂/NH₃-N=3:1; and total Cl₂=5 mg/L, Cl₂/NH₃-N=5:1). Physico-chemical parameters and nitrification indicators were monitored during the tests. The characteristics of biofilm extracellular polymetric substance (EPS) were evaluated after the experiment. The main results from the study indicate that nitrification is affected by hydraulic conditions and the process tends to be severe when the fluid flow transforms from laminar to turbulent (2300<Re<4000). Increasing disinfectant concentration and optimizing Cl₂/NH₃-N mass ratio were found to inhibit nitrification to some extend when the system was running at turbulent condition (Q = 10 L/min, Re = 5535). EPS extracted from biofilm that was established at the flow rate of 6 L/min had greater carbohydrate/protein ratio. Furthermore, several nitrification indicators were evaluated for their prediction efficiency and the results suggest that the change of nitrite, together with total organic carbon (TOC) and turbidity can indicate nitrification potential efficiently.     

Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

Photodegradation of Hexafluoropropylene Oxide Trimer Acid under UV Irradiation

As a novel alternative to traditional perfluoroalkyl substances (PFASs), including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), hexafluoroproplyene oxide trimer acid (HFPO-TA) has been detected worldwide in surface water. Moreover, recent researches have demonstrated that HFPO-TA has stronger bioaccumulation potential and higher hepatotoxicity than PFOA. To treat these contaminants e.g. PFOA and PFOS, some photochemical techniques by adding exogenous substances had been reported. However, there is still no report for the behavior of HFPO-TA itself under direct UV irradiation. The current study investigated the photo-transformation of HFPO-TA under UV irradiation in aqueous solution. After 72 hr photoreaction, 75% degradation ratio and 25% defluorination ratio were achieved under ambient condition. Reducing active species, i.e., hydrated electrons and active hydrogen atoms, generated from water splitting played dominant roles in degradation of HFPO-TA, which was confirmed by different effects of reaction atmospheres and quenching experiments. A possible degradation pathway was proposed based on the products identification and theoretical calculations. In general, HFPO-TA would be transformed into shorter-chain PFASs, including hexafluoropropylene oxide dimer acid (HFPO-DA), perfluoropropionic acid (PFA) and trifluoroacetate (TFA). This research provides basic information for HFPO-TA photodegradation process and is essential to develop novel remediation techniques for HFPO-TA and other alternatives with similar structures.     

Polycyclic aromatic hydrocarbons in benthos of the northern Bering Sea Shelf and Chukchi Sea Shelf

Eighteen polycyclic aromatic hydrocarbons (PAHs) were detected in benthos collected onboard the ‘Snow Dragon’ in the Northern Bering Sea Shelf and Chukchi Sea Shelf during the 6^th Chinese National Arctic Research Expedition (CHINARE 2014). Σ₁₈PAHs for all biota samples ranged from 34.2 to 128.1 ng/g dry weight (dw), with the highest concentration observed in fish muscle (Boreogadus saida) samples close to St. Lawrence Island. The PAH composition pattern was dominated by the presence of lighter 3 ring (57%) and 2 ring (28%) PAHs, indicating oil-related or petrogenic sources as important origins of PAH contamination. Concentrations of alkyl-PAHs (1-methylnaphthalene and 2-methylnaphthalene) were lower than their parent PAH (naphthalene) in all biological tissue, and their percentage also decreased significantly (p<0.05) compared with those in the corresponding sediment. There were no significant relationships between PAH concentrations and trophic levels, which is possibly due to the combined results of the complex benthic foodweb in the subarctic/Arctic shelf region, as well as a low assimilation/effective metabolism for PAHs. According to toxic potency evaluation results from TCDD toxic equivalents (TEQs) and BaP-equivalent (BaPE) values, whelk (Neptunea heros) and starfish (Ctenodiscus crispatus) are two macroinvertebrate species showing relatively higher dioxin-like toxicity and carcinogenic risk.     

Particulate matter exchange between atmosphere and roads surfaces in urban areas

The deposition and the re-suspension of particulate matter (PM) in urban areas are the key processes that contribute not only to stormwater pollution, but also to air pollution. However, investigation of the deposition and the re-suspension of PM is challenging because of the difficulties in distinguishing between the resuspended and the deposited PM. This study created two Bayesian Networks (BN) models to explore the deposition and the re-suspension of PM as well as the important influential factors. The outcomes of BN modelling revealed that deposition and re-suspension of PM10 occurred under both, high-traffic and low-traffic conditions, and the re-suspension of PM2.5 occurred under low-traffic conditions. The deposition of PM10 under low-volume traffic condition is 1.6 times higher than under high-volume traffic condition, which is attributed to the decrease in PM10 caused by relatively higher turbulence under high-volume traffic conditions. PM10 is more easily resuspended from road surfaces compared to PM2.5 as the particles which larger than the thickness of the laminar airflow over the road surface are more easily removed from road surfaces. The increase in wind speed contributes to the increase in PM build-up by transporting particulates from roadside areas to the road surfaces and the airborne PM2.5 and PM10 increases with the increase in relative humidity. The study outcomes provide a step improvement in the understanding of the transfer processes of PM2.5 and PM10 between atmosphere and urban road surfaces, which in turn will contribute to the effective design of mitigation measures for urban stormwater and air pollution.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

Reviews of emission of biogenic volatile organic compounds (BVOCs) in Asia

Biogenic volatile organic compounds (BVOCs) in the atmosphere play important roles in the formation of ground-level ozone and secondary organic aerosol (SOA) in global scale and also in regional scale under some condition due to their large amount and relatively higher reactivity. In places with high plant cover in the tropics and in China where air pollution is serious, the effect of BVOCs on ozone and secondary organic aerosols is strong. The present research aims to provide a comprehensive review about the emission rate, emission inventory, research methods, the influencing factors of BVOCs emissions, as well as their impacts on atmospheric environment quality and human health in recent years in Asia based on the summary and analysis of literatures. It is suggested to use field direct measurement method to obtain the emission rate and model method to calculate the emission amount. Several recommendations are given for future investigation and policy development on BVOCs emission.     

保定市大气污染特征和潜在输送源分析

保定市是京津冀地区重要城市之一.为了解保定市大气污染物质量浓度特征和潜在输送源,对保定市国控点2017年1月1日-12月31日PM₁₀、PM_2.5、SO₂、NO₂、O₃、CO等常规大气污染物数据进行分析,并利用TrajStat后向轨迹模型进行区域传输研究.结果表明:①ρ（PM₁₀）、ρ（PM_2.5）、ρ（SO₂）、ρ（NO₂）分别为（138±96）（84±66）（29±23）和（50±24）μg/m3,与2016年相比分别下降5.9%、9.1%、25.5%和13.1%;ρ（CO）较2016年下降了14.0%;ρ（O₃）较2016年增长了25.2%.ρ（PM₁₀）、ρ（PM_2.5）、ρ（NO₂）和ρ（O₃）分别超过GB 3095-2012《环境空气质量标准》二级标准限值的0.97、1.40、0.25和0.34倍,ρ（SO₂）和ρ（CO）未超标.②除ρ（O₃）外,其他污染物质量浓度均呈冬季最高、夏季最低的季节性特征,其中,冬季PM_2.5污染最为严重,春季PM_2.5~10（粗颗粒物）污染严重.③空气质量模型源解析结果显示,保定市ρ（PM_2.5）约60.0%~70.0%来自本地污染源排放.后向轨迹结果表明,在外来区域传输影响中,保定市主要受到西北方向气团（占比为21.7%~60.0%）远距离传输和正南方向气团（占比为34.8%~50.5%）近距离传输的影响.④PSCF（潜在源贡献因子分析法）和CWT（浓度权重轨迹分析法）分析表明,除保定市及周边区县本地污染贡献外,位于太行山东麓沿线西南传输通道的邯郸市、邢台市、石家庄市是影响保定市PM_2.5的主要潜在源区.研究显示,PM_2.5为保定市大气中的主要污染物,并呈冬季高、夏季低的变化特征,其主要来自西北远距离输送和南部近距离传输.      

新冠肺炎疫情期间我国居民洗手行为研究

直接接触和飞沫传播等方式是新型冠状病毒传播的主要途径,合理的洗手行为是切断暴露途径和降低病毒感染风险的有效防控措施,对于新型冠状病毒肺炎（COVID-19,简称“新冠肺炎”）疫情的防控具有重要的作用.该研究于2020年2月25日—3月14日,采用电子问卷的方式调查了覆盖我国31个省（自治区、直辖市）1 728个县（区）18岁及以上的居民,收集共计8 330名成人的洗手情形及洗手时长等信息,分析不同暴露情景下的洗手行为及其影响因素.结果表明:女性、城市地区居民在洗手比例和洗手时长上均分别高于男性、农村地区居民.人群在一般暴露情景下的洗手比例较高,而对于病毒感染风险较高的暴露情景（如咳嗽或打喷嚏后、接触他人后等）的洗手率（分别为73.6%和83.9%）排名靠后,说明人群对病毒的传播途径和防护措施有待深入理解;在洗手时间上,根据WHO规定的洗手时长标准（20 s）,仅有41.7%的人群洗手时长合格（大于20 s）,城区居民洗手时长的合格率（42.0%）显著高于农村地区（39.7%）;总体上,具有外出经历的人群洗手比例较未曾外出的人群高,新冠肺炎疫情期间居住地是否存在新冠肺炎疑似和确诊病例显著影响居民的洗手行为,但是疫情最严重的地区居民的洗手时长合格率（37.2%）最低,反而疫情最轻的地区居民的洗手时长合格率（43.6%）最高,说明居民的洗手行为可能受疫情等多方面的影响.研究显示,相比于非疫情期间而言,疫情期间我国居民洗手行为发生率提高,洗手时长合格率提高,但是仍然水平偏低.应提高居民洗手行为意识,科学地执行洗手这一防护措施,相关政策制定以及个人防护应当进一步关注和重视洗手行为的防疫作用.